联系我们

与泰克代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

Christopher Loberg's blog

发布

Tektronix power rail measurement with Passive Probes (below) and Power Rail Probes (above)
Achieving Better Energy Efficiency in AI Data Centers With Power Integrity Testing Tuesday, June 18, 2024
Introduction Deployment of AI-based technology is happening in the Data Center. The processor-intensive servers are driving up energy demands. The table below illustrates the magnitude of the impact. The International Energy Agency (IEA) predicts that data centers will account for up to seven percent of global electricity consumption by 2030; a number equivalent to the entire country of India’s …
Engineer using a Tektronix Isolated probe with an oscilloscope
SiC MOSFETs Represent Opportunities and Measurement Challenges for EV Designers Tuesday, November 15, 2022
Innovation in semiconductor technology is enabling more efficient and dense power conversion in hybrid and electric vehicles. Wide bandgap silicon carbide (SiC) technology enables faster switching and lower switching loss in high voltage EV systems.  However, the same fast switching and high voltage capabilities that make SiC MOSFETs so promising, also create measurement challenges. Probing the …
Conventional oscilloscope probes make signals appear noisy on SiC gate drives
有效测量碳化硅 (SiC) MOSFET信号 Monday, December 6, 2021
碳化硅 (SiC) MOSFET越来越多地应用于电动汽车、因为它们能够承受高温,具备更快的开关速度和更大的额定电流,以更高的效率运转(尤其在高压下)。 然而,在验证设计时使用碳化硅 (SiC) MOSFET存在挑战。它的开关特性很有价值,也对准确的验证测量提出了挑战。正确的探头选择和应用可以大大提高测量精度。 阅读本文后,您可以在新泰克应用说明有效测量碳化硅 (SiC) 电力电子系统的信号中了解详细信息。 什么是碳化硅 (SiC) MOSFET? MOSFET,即金属氧化物半导体场效应晶体管,是一种用于放大或切换电子信号的晶体管。它具有高能源效率、出色的散热性、高电流密度、优秀的高温性能和高额定电压。但是,为了更好地了解碳化硅 (SiC) MOSFET,您需要首先了解MOSFET是什么以及可以在什么场合应用它。 MOSFET简介 MOSFET …
6 Series B mixed signal oscilloscope displaying jitter
Understanding How To Analyze Jitter Wednesday, November 17, 2021
Steve Sandler, President of Picotest, as well as Maria Agoston, Cameron Lowe, Tony Ambrose, all of Tektronix, also contributed to this blog. Why You Should Care About Jitter Jitter is a common problem. A quantified misplacement in time of the signal relative to the expected time position, jitter is ultimately a degradation of the key definition of performance of a serial link, which is the bit …
1_0
Using Tektronix Real-Time Spectrum Analyzers for Automatic Drone Detection Friday, September 20, 2019
As hobbyist and commercial drones become ever cheaper and more ubiquitous, security and government officials around the world are stepping up efforts to detect the presence of drones or unmanned aerial vehicles (UAVs) in places where they don’t belong. Germany recently announced plans to install drone detection systems at its major airports to avoid runway and airport shutdowns when drones enter …
TITLE: CAN SCIENTISTS RELIABLY CONTROL A QUANTUM CHIP?
CAN SCIENTISTS RELIABLY CONTROL A QUANTUM CHIP? Thursday, April 4, 2019
When I ask my quantum research customers what part of their project they’re most excited about, almost invariably they tell me it’s some unique element of their quantum chip. But when the experiment is over, and the findings are published, was the chip the most challenging building block of their computer? Not always. In fact, after having gone through it all, many teams find that integration …
img1_2
Understanding serial trigger and decode software for DPO70000SX scopes Wednesday, August 2, 2017
The DPO7000SX ATI Performance Oscilloscope is an amazing instrument, with the ability to capture up to 70 GHz signals with the lowest noise and highest fidelity of any oscilloscope on the market today. But what takes it from being a mere product to a complete test and measurement solution are the more than 50 software option packages that automate compliance testing for important standards or give …
link20training
Keeping ahead of link training debug challenges Saturday, January 14, 2017
The speeds of Ethernet communication links used in the datacenter continue to increase and next generation network adapters based on 100GbE and 400GbE Ethernet (802.3xx) standards are already in active product development and testing. Although these links employ fiber, signals must still travel over copper backplanes and interconnects.Achieving these speeds over copper requires the use of …
master20and20extension
The growth in datacom is impacting IEEE & OIF test strategies Monday, July 18, 2016
  By Chris Loberg, Sr. Manager, Performance Instruments Keeping pace with the fast evolution of datacom networks requires a test strategy with room to grow. Testing for standards like LR8 requires instruments with high bandwidth and, more importantly, high dynamic range. The need for superior dynamic range comes into play because of the smaller amplitude sizes and tight margins of PAM4 modulated …