联系我们
与泰克代表实时聊天。 工作时间：上午 9:00 - 下午 5:00（太平洋标准时间）。
电话
致电我们
工作时间：上午9:00-下午5:00（太平洋标准时间）
下载
下载手册、产品技术资料、软件等：
反馈
产品支持和下载
欢迎访问泰克产品支持
虽然我们很愿意与您全天“讨论技术问题”，但我们知道您时间宝贵。因此，我们简化了流程，让您可以轻松下载所有当前产品以及许多停产产品的手册、产品技术资料和软件。只需告诉我们您使用的是哪种产品，我们就会向您显示所有相关信息。
您选择的产品型号当前有售。 提供了以下支持信息。
-
产品技术资料 文献编号： 发布日期 6517B 静电计/高阻表
吉时利5位半6517B静电计/高阻表提供的精 度和灵敏度指标高于其他同类型仪表。它还具有 完备的功能，使测量高阻和绝缘材料电阻率变得 简单。6517B具有425读数/秒的测试速率，比同 类型的静电计快很多，可以提供快速、简易的弱 电流测量能力测量弱电流。6430 亚FA程控源表
6430亚fA程控源表集合了吉时利源表 和源测量单元（SMU）产品的电压源和电流 源及测量功能，比静电计灵敏度更高，噪 声更低，输入阻抗更高。这种独特的性能 是通过6430远端前置放大器实现的，它提 供非常灵敏的双向放大器，用于测量或产 生被测试器件的电流。远端前置放大器输 出的高电平信号通过一条2米长的线缆发 送到控制主机上。这使得用户可以直接， 或者近距离连接该信号，减少线缆噪声 的影响。KickStart 仪器控制软件
KickStart软件让你加快获得测量数据。 KickStart简化了您需要知道的仪器知 识，在短短几分钟内，您就可以开箱使 用仪器，获得被测器件的实际数据。通 过立即绘制数据图，在读表中快速提供 数据的统计汇总，KickStart可以让您 更快地收集所需信息，制订所需决策， 转向器件开发的下一个阶段。通过使用 方便的导出功能，KickStart可以简便 迅速地复现测试，比较结果，节省时间。 有了KickStart，您可以把重点放在理 解测试结果上，让您的团队满足创新目 标。1KW-60965-3 Model 6514 Programmable Electrometer
2010 catalog pages for the Model 6514 Programmable Electrometer.237-AGL-2型三轴电缆产品技术资料
The Keithley Instruments Model 237-ALG-2 is a 6.6 ft (2 m) triaxial cable that is terminated with a three-slot male triaxial connector on one end and alligator clips on the other end.PA-298D 7078-TRX-GND (CS-712) 3-Slot Male Triaxial To BNC Adapter (Guard Removed)
The Model 7078-TRX-GND (CS-712) is a triaxial plug to BNC socket adapter with the guard removed. You can use it to connect BNC cables to equipment with three-lug triaxial connectors. The Model 7078-TRX-GND (CS-712) does not have a through connection …PA-293D Model 6517B-ILC-3 Interlock Cable
The Keithley Instruments Model 6517B-ILC-3 Interlock Cable connects the interlock of the Model 6517B Electrometer with the Model 8009 High Resistivity Test Fixture.PA-975B Model 4288-2 Dual-Unit Rack-Mount Kit
The Model 4288-2 Dual Fixed Rack Mounting Kit includes all of the hardware necessary for side-by-side rack mounting of two instruments, including Series 2000, 2182A, Series 2300, Series 2500, 2700, 2701, 6220, 6221, 6485, 6487, 6514, or 6517B.PA-290D
-
技术文档 文档类型 发布日期 吉时利为电化学测试方法和应用提供的仪器
应用指南 Touch, Test, Invent，采用下一代电流和电压源测量仪器
速查资料 当今汽车电子的电源测试
宣传册 汽车通讯与控制系统的测试方法
速查资料 半导体测量中的高速与输出
海报 按信号类型进行切换的电子手册指南
速查资料 寻找当今解决方案，迎接未来纳米特性分析挑战
宣传册 Model 6517B Electrometer High-Resistance Meter Specifications
Document number SPEC-6517BC Specifications are subject to change without notice. VOLTS Range 6½-digit resolution Accuracy (1 year)1 18 °C to 28 °C ± (% reading + offset) …技术指标 Supporting the Materials Research of the Future
Advances in materials science are driving the future of many industries where the electrical properties of materials can reveal previously unknown materials characteristics. This flyer highlights the Keithley instrumentation that is vital to helping …速查资料 Four Step Error Checker Poster
This printable poster offers insight into errors commonly made when measuring low voltage, low current, low resistance, high resistance, or voltage from a high resistance source. Learn what can cause these errors, and get tips on how to avoid them.海报 Source Measure Unit (SMU) Instruments Selector Guide
MAKE MULTIPLE MEASUREMENTS ACCURATELY USING A SINGLE INSTRUMENT A source measure unit (SMU) instrument is a five-in-one tool. It combines the useful features of a digital multimeter (DMM), power supply, current …产品选择指南 Measuring the Electrical Resistivity of Insulating Materials
This application note explains how to make volume and surface resistivity measurements of insulators using the Keithley 6517B Electrometer/High Resistance Meter, 8009 Resistivity Test Fixture, and Kickstart High Resistivity Application that can be …应用指南 Keithley Low Level Measurements Handbook - 7th Edition
The Keithley Low Level Measurements Handbook is a reference and guide for anyone looking to perform sensitive DC electrical measurements. Scroll down to find the section you need, or download the entire book as a PDF above. Once you click on each of …产品文章 Volume and Surface Resistivity Measurements of Insulating Materials Using the 6517B Electrometer/High Resistance Meter
Introduction A fundamental property of insulators is resistivity. The resistivity may be used to determine the dielectric breakdown, dissipation factor, moisture content, mechanical continuity and other important properties …应用指南 Model 6514 Programmable Electrometer Specifications
Model 6514 Programmable Electrometer Specifications技术指标 Model 6430 Sub-Femtoamp Remote SourceMeter Specifications
Model 6430 Sub-Femtoamp Remote SourceMeter Specifications技术指标 Solutions for Production Testing of Connectors
应用指南 Understanding Control Systems and Communications for Today's Automobiles
速查资料 Maximize Speed and Throughput for Semiconductor Measurements Using Source Measure Units (SMUs)
海报 Your Guide to Creating High Performance Switching Applications
速查资料 New Materials and Devices E-Guide
宣传册 Choosing the Optimal Source Measurement Unit Instrument for Your Test and Measurement Application (also Applicable to Series 2600B)
白皮书 Optimizing Low-Current Measurements and Instruments
Characterizing devices at low current levels requires knowledge, skill, and the right test equipment. Even with all three, achieving accuracy at low current levels can be a challenge because the level of the current is often at or below the noise …白皮书 Advances in Electrical Measurements for Nanotechnology
Rev 3.15.13产品文章 Methods to Achieve Higher Currents from I-V Measurement Equipment
应用指南 Low Current/ High Resistance Measurement Selector Guide
Low Current/ High Resistance Measurement Selector Guide - 2013 Catalog产品选择指南 Low Current Measurements
应用指南 Guide to Measuring New Materials and Devices
产品文章 2218 Production Testing of High-Intensity Visible LEDs
应用指南 Improving the Repeatability of Ultra-High Resistance and Resistivity Measurements
High impedance insulators are an integral part of today's high performance electronic products. The purity of the materials used to construct these insulators can make the difference between a product that works properly and …白皮书 #2615 Determining Resistivity and Conductivity Type using a Four-Point Collinear Probe and the Model 6221 Current Source
应用指南 Counting Electrons: How to Measure Currents in the Attoampere Range
技术文章 Problem: Noisy Readings in High Resistance Measurements
技术文章 Problem: Noise in Low Current Measurements
技术文章 Problem: Measurements are Low in High Resistance Measurements
技术文章 Problem: Error in Low Voltage, Low Current Measurements
技术文章 Better Solar Cell Testing: The Key to Faster Development and Production
技术文章 High Accuracy Electrometers for Low Current/High Resistance Applications
Keithley has more than a half-century of experience in designing and producing sensitive instrumentation. As new testing requirements have evolved, we've developed dozens of different models to address our customers needs …宣传册 2402 DC Production Testing of OLED Displays
应用指南 Device Characterization Techniques Using Keithley SourceMeter Instruments with LabTracer Software
应用指南 #315 Capacitor Leakage Measurements Using a Model 6517A Electrometer
Dielectric Types Capacitors are very important in all areas of electronics.From timing circuits to sample and hold applications, we depend on capacitors to act in a nearly ideal fashion. In many cases, however, complex …应用指南 #1138 Switching in Multipoint Testing
应用指南 Using Two Model 2400 SourceMeter Instruments to Source up to 2 Amps
This brief describes the process of combining two SMUs in parallel for increased current output.技术简介 Quick Reference Guide to SCPI Commands
应用指南 Eliminating Common SCPI Errors
Eliminating Common SCPI Errors There are three SCPI errors which occur more often than any others: -113, "Undefined header" -410, "Query INTERRUPTED" -420, "Query UNTERMINATED" This paper gives likely causes …应用指南 Making High Resistance Measurements on Small Crystals in Inert Gas or High Vacuum w/ the Model 6517A
Introduction Crystalline materials are fundamental to modern electronics and optoelectronics. Therefore, the electrical properties of these materials, such as their (anisotropic) conductivity and photoconductivity, as well as the …应用指南
-
软件 文档类型 部件号： 发布日期 KickStart Instrument Control Software version 2.11.2
KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the ability to …应用 KICKSTART-2.11.2 KickStart Instrument Control Software version 2.11.1
KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the ability to …应用 KICKSTART-2.11.1 Keithley I/O Layer version C10 (Windows 11, 10, 8, 7 Compatible)
Keithley I/O Layer version C10 (KIOL-850C10 adds support for Windows 10 and 11 Operating Systems and installs NI-VISA Runtime 17.5 and NI-ICP 17.0. This release replaces previous versions of KIOL-850B07, KIOL-850C02, KIOL-850C03, KIOL-850C04, KIOL …应用 KIOL-850C10 Kickstart 仪器控制软件 2.5.0（Windows 10 8 7兼容）
"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of …应用 Matlab_Hello world使用Matlab对仪器设备进行编程入门
本例程提供了Matlab对仪器进行控制，演示了最基本的连接仪器的步骤。 请注意相关软件配置环境以及VISA resource地址。Tektronix公司不负责该例程的完整性、可执行性和正确性。 请点击‘’安装说明“链接直接获取 TXT 源码文件脚本例程 Model 6517B Firmware version A14
Firmware version A14 and Release Notes. Use with Keithley Flash Wizard to upgrade a 6517B instrument.固件 6517B-FRP-A14 6430 C30 Firmware Release Package
Model 6430 Firmware Release Package Version C30固件 6430-FRP-C30 Keithley I/O Layer - version C07 (Windows 8, 7, Vista, and XP Compatible)
Keithley I/O Layer version C07 (KIOL-850C07 adds a change to only send the :syst:rem command to RS-232 connections This release replaces previous versions of KIOL-850B07, KIOL-850C02, KIOL-850C03, KIOL-850C04, KIOL-850C05, KIOL-850C06). This version …应用 KIOL-850C07 Model 6517B Firmware Version A13
Model 6517B A13 Firmware and Release Notes.固件 6517B-801A13 6514 A11 Firmware Upgrade.exe (2.5Meg)
Flash Wizard to upgrade 6514 to firmware version A11.固件 6514-800A11 2400 IVI Driver for Visual Basic (VB), VC/C++, Labview (LV) and LabWindows CVI, Rev. B01 (7.2Mb) - Requires Installation of Keithley I/O Layer (KIOL-850)
IVI driver for 24xx series, includes support for 6430. Not the VXIPnP driver.驱动程序 2400-854B01 Model 6517B Firmware Version A12
Model 6517B A12 Firmware and Release Notes.固件 6517B-801A12 6514 Native LabView 2009 Driver version 1.0.0 - Project Style
6514 Native LabView 2009 Driver Version 1.0.0驱动程序 6514-LV-1.0.0 6514 LabVIEW 5.X (LV) Driver for Windows
驱动程序 6514-LV-5.X 6430 BETA LabVIEW ver. 5.X (LV) driver for Windows
驱动程序 6430-LV-5.X Model 6517B Firmware Version A10
6517B Version A10 Firmware and Release Notes.固件 6517B-801A10 6514 LabVIEW (LV) ver. 6i Driver
驱动程序 6514-LV-6I
-
常见问题 常见问题 ID Keithley 6517A静电计适用于超高电阻超低电流测量的静电计与6517B的区别
6517B静电计相对6517A静电计的分辨率普遍提升了1个数量级（电流测试档位，电阻参考电流档）。背面板有所变化，去除ext trig in 和MTR comp out 的BNC接口。digital I/O口和interlock口改变接口形式。接口位置发生变化。473271 How is resistance measured?
Electrical resistance is measured by either of two methods: constant current or constant voltage. The constant current technique sources a known current through an unknown resistance and the resulting voltage is measured. This technique is generally …71691 How can I measure output noise of an a Si:H TFT?
Assuming the system has low noise content, and the frequency region of interest is a few hertz or less, the Model 6430 Sub-Femtoamp Remote SourceMeter is the lowest noise instrument. It can measure current with noise less than 4E-16Ap-p.71366 What is the lowest resistivity that can be measured with the 8009 resistivity test chamber and 6517B electrometer?
It depends on the voltage source and ammeter, not so much the test fixture. The Model 6517B voltage source is capable of sourcing 10mV to 1000V. And up to 10mA. So this means if it sources 1V and has a 10mA compliance then it could read 100 ohms …778991 Why does my 6514 read OHMs correctly in unguared mode but reports open CKT in guarded mode?
Why does my 6514 read OHMS correctly in the unguarded mode, but shows open circuit in the Guarded mode? Answer: Bad internal fuse! Verify by connecting approximately 10Mohm between RED and BLK alligator clips of input triax cable. Set meter to …69771 Why does the 6514 in remote DDC mode operation return only five and a half digit readings?
Product(s): Electrometers:6514 Question:Why does the 6514 in remote DDC mode operation return only 5 digit readings? Answer:The emulation mode on the Model 6514 enables it to accept device-dependent commands (DDC) for the Models …69776 What are the differences between an electrometer, pico-ammeter and current amplifier?
Product(s): Electrometer: 6514,6517A,617,614, 6512,602,600B Pico-Ammeter: 6487,6485,486,487,485,480 Current Amplifier: 428-PROG, 428-MAN Question: What are the differences between an electrometer, pico-ammeter and current …71766 What are the significant differences between the Models 6514 and 6517A Electrometers?
What are the significant differences between the Models 6514 and 6517A Electrometers? There are several differences between these two electrometers: Voltage source. The Model 6517A Electrometer contains an independent, programmable, bipolar …69766 Are settings saved on Model 6517B when updating to a later firmware?
Yes, settings can be saved using the following procedure: 1. Press MENU, let go. 2. Select SAVESETUP, press ENTER. 3. Select SAVE, press ENTER. 4. Select number for save (0-9), press ENTER. To restore: 1. Press MENU, let go. 2. Select SAVESETUP …468411 PicoAmmeters/Electromeers/Sensitive SMUs -What is Guard?
The concept of guarding is to surround the input high node or DUT with a guard shield that is at the same potential. Current cannot flow through a leakage resistance that has a 0 V drop across it. Guarding is used to greatly reduce leakage current …468106 What is the effective input resistance on the 6517B electrometer in current mode?
Voltage burden is what is important here. Model 6517B is as close to an ideal ammeter as its voltage burden is extremely low. However, you can calculate the "effective" input resistance of each range. 20pA range is 20uV / 20pA = 1M ohm 200pA range is …774026 How to make a Resistivity Measurement using the 8009 and 6517B in Alt-Polarity Mode
1) Connect interlock, Source Voltage HI and LO, and triax meter cables between 6517B back panel and 8009 test fixture. 2) Determine type of resistivity measurement (surface or volume) and use selector switch on 8009. 3) To set resistivity …255381 Compliance: What is Compliance Voltage on the Source-Measure Units and SourceMeter instruments?
Compliance voltage is the maximum voltage a current source will go to in its attempt to source the programmed current. Compliance voltage values are user settable, allowing complete control over the sourcing and measurement process.71061 Comparison of DDC and SCPI Command codes for 6517.
Look the attached word document for comparison of DDC(Device Dependent Commands) to SCPI commands for Model 6517A.729066
