Remote Operation: What Front Panel Settings are Required to use the VXIPnP drivers for SourceMeter?

Question

Accepted Answer

What Front Panel Settings are Required to use the VXI PnP drivers for the SourceMeter Instruments? Selection and configuration of GPIB or RS-232 communication is important. Both are supported by the VXI PnP driver, however, the instrument must be configured from the front panel first. Use the front panel buttons and select: Menu Communication GPIB or RS-232 Instrument Settings For GPIB: For RS-232: select the address (default is 24) select SCPI protocol (not 488.1) BAUD: 9600 BITS: 8 Parity: NONE Terminator: LF Flow-CTRL: XON-XOFF Typical Resource Names instrument at address 24 instrument on COM1 GPIB0::24::INSTR ASRL1::INSTR &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;

Remote Operation: What Front Panel Settings are Required to use the VXIPnP drivers for SourceMeter?

问题：

答案：