联系我们

与泰克代表实时聊天。 工作时间：上午 9:00 - 下午 5:00（太平洋标准时间）。

电话

致电我们

工作时间：上午9:00-下午5:00（太平洋标准时间）

下载

下载手册、产品技术资料、软件等：

下载类型
型号或关键字

反馈

产品支持和下载

欢迎访问泰克产品支持

虽然我们很愿意与您全天“讨论技术问题”，但我们知道您时间宝贵。因此，我们简化了流程，让您可以轻松下载所有当前产品以及许多停产产品的手册、产品技术资料和软件。只需告诉我们您使用的是哪种产品，我们就会向您显示所有相关信息。

输入型号:
Search by Product Category (optional)

  1. 在以上字段中输入您的泰克或 Keithley 产品的型号或产品系列名称。

  2. 开始输入时，请在搜索字段显示条目中查找您的产品名称。

  3. 从结果列表中选择一个有效的产品名称。

  4. 单击前往查看您的产品可用的支持信息。

搜索提示：要查看最多的结果，请选择您产品的基本型号名称。避免选择列表中可能显示的特定选项或配置。

您选择的产品型号当前有售。 提供了以下支持信息。

  • 使用 IsoVu 电流和电压探头进行高侧双脉冲开关损耗测试
    针对研究宽禁带 SiC 和 GaN 功率整流器的测试需求，为工程师演示了如何进行精确的高侧双脉冲测量。应用工程师 Seamus Brokaw 采用的是 IsoVu™ 隔离电流探头、隔离电压探头和运行双脉冲测试应用软件的 5 系列 B MSO。他介绍了测试设置、探头选择和相差校正，然后演示了用于确定开关损耗的双脉冲测试，接着介绍了 di/dt、漏极峰值电压、dV/dt …
    时长: 13m 11s
    Measuring Ripple and Noise on Power Rails
    Learn how spectrum analysis on a 5 Series B MSO, along with voltage-vs-time waveforms, provides more insight into power rail noise.
    时长: 05:23
    Powering Our Electrified Future
    三相电机驱动测量演示
    观看三相电源系统演示，了解 5 或 6 系列 B MSO 示波器精确测量开关电源转换器和控制电路性能的能力。使用差分探头和三相逆变器/电机驱动分析软件，可以在宽电压和电流范围内进行高带宽测量。
    时长: 3:24
    Work and collaborate almost anywhere with the 5 Series B MSO
    Work and collaborate almost anywhere with the 5 Series B MSO
    Control your oscilloscope and analyze your measurements at home.  Learn how to connect to a 5 Series B MSO remotely, save measurements, and analyze waveforms on your PC.
    时长: 04:32
    多通道频谱分析
    Being able to see the frequency content of a signal is extremely useful for troubleshooting.  Being able to see multiple channels of spectrum analysis, synchronized with signals in the time domain …
    时长: 4m 55s
    4 Series B MSO - Outstanding Measurement Performance
    The 4 Series B MSO oscilloscope offers powerful measurement and debugging tools. Watch this video to learn about visual triggers, segmented memory, 12 to 16-bit vertical resolution, automated …
    时长:
    4 Series B MSO - Waveform Display and Controls
    This video will give you a taste of the 4 Series B MSO's award-winning user interface, integrating an HD touchscreen display with traditional knobs and buttons. By the end of this video you will …
    时长:
    4 Series B MSO - Probes, Protocols, Spectrum Analysis, Power Analysis and More
    The 4 Series B MSO is a versatile addition to your bench, addressing scores of signal types and applications. This video touches on available probes, RF spectrum analysis, mixed signal analysis …
    时长:
    4 Series B MSO Oscilloscope Overview
    This video provides an overview of the new 4 Series B MSO oscilloscope, including key measurement specifications and highlighting the new faster processor, analysis capabilities and the award …
    时长:
    车载多比特以太网符合性测试
    自动驾驶和互联车辆正在推动更高速度的车载网络。我们提供的视频演讲和课件对最新的 汽车多比特以太网（10Gbps）符合性测试 的新测量要求进行了深入探讨，探讨了MultiGBASE-T1（IEEE 802.3ch）的测试案例，以及工程师在测试设置和执行期间可能遇到的陷阱。除了符合性测试，还将介绍系统级噪声测试，使用非侵入式的信号分离方法，对100BASE-T1进行协议解码和信号完整性分析。 …
    时长: 55m 37s
    使用 5 系列 B MSO 示波器测量 SiC 电源上的开关损耗
    观看这个演示，了解使用5系列B MSO示波器对SiC MOSFET进行开关损耗测量
    时长: 05:00
    Serial Bus Protocol Decoding and Analysis with a 5 Series B MSO
    Serial Bus Protocol Decoding and Analysis with a 5 Series B MSO
    A demonstration of serial bus protocol decoding, display and searching on the 5 Series B MSO. Examples using CAN, USB 2.0, SPI are shown.
    时长: 06:25
    The Science Behind The Low Noise
    The Science Behind The Low Noise
    What's the big deal with low noise? We talked to our engineers about how they achieved ground-breaking noise performance in the 6 Series Mixed Signal Oscilloscope.
    时长:
    How to control Tek Scope over LAN
    How to Control a Tektronix Oscilloscope Over a LAN
    Learn how to use the eScope function to remotely control a Tektronix oscilloscope over a network without any special software. This video shows how to find the IP address of the scope and use a …
    时长: 2:14
    A New Way of Performing Multi-Channel Spectrum Analysis on an Oscilloscope
    A New Way of Performing Multi-Channel Spectrum Analysis on an Oscilloscope
    If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels …
    时长:
    USB 31 Debugging When Compliance Measurements Fail for TX
    USB 31 Debugging When Compliance Measurements Fail for TX
    This short video shows how to debug a compliance measurement that has failed by using Tektronix’ Jitter and Eye Diagram Software, DPOJET. Using DPOJET, engineers can go from a compliance …
    时长:
    3 Series MDO Advanced Built-in Functions
    3 Series MDO Advanced Built-in Functions
    The 3 Series MDO is a versatile addition to any bench.  Find out how digital channels can expand your visibility into your designs. Learn about the built-in spectrum analyzer options.  See serial …
    时长:
    3 Series MDO User Interface Tour
    3 Series MDO User Interface Tour
    In just a few minutes you'll learn everything you need to know to be able to operate the 3 Series MDO.  You'll get a guided tour of the high-definition display, learn how to use the touchscreen to …
    时长:
    3 Series MDO Product Overview
    3 Series MDO Product Overview
    Get an overview of the 3 Series MDO.  See how to operate the controls -- after the first 3 minutes you'll know everything you need to know to be able to operate the instrument.  Learn about making …
    时长:
    3 Series MDO Integrated Spectrum Analyzer
    3 Series MDO Integrated Spectrum Analyzer
    Learn how the 1 GHz or 3 GHz built-in spectrum analyzers available in the 3 Series MDO can take the place of a stand-alone spectrum analyzer.  Learn about specifications, markers, spectrogram …
    时长:
    3 Series MDO Measurement Performance
    3 Series MDO Measurement Performance
    The 3 Series MDO offers impressive specifications and supports powerful measurement tools.   See how to make cursor measurements and automated measurements like peak-to-peak voltage,  period, and …
    时长:
    USB 20 Decode Trigger and Search
    USB 20 Decode Trigger and Search
    Discover how to use a Tektronix MSO5000B Series Oscilloscope to validate the operation of a High-Speed USB serial bus, using the SR-USB option.
    时长:
    Total Product Protection
    Total Product Protection
    Sometimes bad things happen to good scopes!  Ensure you've got it covered with a Total Product Protection plan from Tektronix, the only coverage plan available for test equipment with accident …
    时长:
    5 系列 B MSO 技术概述
    时长: 16m 3s
    The Team Behind the 5 Series MSO
    The Team Behind the 5 Series MSO
    Watch some of the team members behind the innovative new Tektronix 5 Series MSO talk about the challenges they faced and how they overcame them.
    时长:
    Triggering on an ASK Amplitude Shift-Keying Signal with Spectrum View
    Triggering on an ASK (Amplitude Shift-Keying) Signal with Spectrum View
    Watch this short demo of RF vs Time hardware trigger to see how an ASK (Amplitude Shift-Keying) signal changes over time.  The Spectrum View capability on the 4, 5 and 6 Series MSO oscilloscopes …
    时长: 3:16
    Spread Spectrum Clock Analysis With RF vs Time Triggering
    Spread Spectrum Clock Analysis With RF vs Time Triggering
    See how to stabilize a hardware trigger on the up-down chirp pattern of a spread spectrum clock using a Frequency Deviation vs. Time trigger.  The Spectrum View capability on the 4, 5 and 6 Series …
    时长: 2:14
    监测电源的步进负载响应
    在检查电源控制环路的增益和相位裕量后，我们可以监测电源对阶跃负载变化的响应，观察控制环路的效果。在本例中，示波器内置函数发生器的脉冲输入到Picotest有源电流注入器中，对电源需求应用阶跃变化。 信号源： 任意波形/函数发生器 (内置到6系列MSO中) Picotest PJ2111A电流注入器 配置： 6系列MSO示波器
    时长: 01:38
    使用示波器上的TDR技术测量阻抗
    用实例说明怎样使用时域反射计(TDR)测量电缆和PCB轨迹的阻抗和长度，以及印刷电路板的介电常数和故障位置。您将看到多个实例，来说明阻抗差异和不匹配所产生的效应。 此外，您将看到怎样使用TDR使用的同样的快速边沿，来迅速检查电缆和连接的平坦度。 配置： 10 GHz 6系列MSO示波器，测量响应 Picotest Fast Edge信号发生器(32 ps典型值)及标配10 …
    时长: 05:42
    使用DC偏置测量电感器
    这个视频用实例说明了在对电感器应用1 A DC偏置电流时，怎样使用线路注入器和示波器测量频率相关电感。 电源在输入滤波器和输出滤波器中都有电感器。这些元件的有效电感在高工作电流时会明显下降，导致纹波和EMI提高。使用DC偏置进行测试，可以帮助您了解电感器的在线性能。 信号源： 任意波形/函数发生器 (内置到6系列MSO中) 台式电源 Picotest …
    时长: 01:49
    测量电源的波特图/控制环路响应
    本视频介绍了怎样使用配有控制环路响应测量功能的示波器，测量电源控制环路的频响(波特图)。 波特图是系统的频响图，表征不同频率中的增益和相位。 调制信号被注入到反馈环路中，然后可以确定调制信号和控制环路输出比例，计算增益，再按时间进行对比，找出相位。 信号源： 任意波形/函数发生器 (内置到6系列MSO中) Picotest J2101A注入变压器 配置： …
    时长: 01:39
    测量DC-DC转换器的负阻
    用实例说明怎样确定EMI滤波稳定性和米德尔布鲁克准则。 米德尔布鲁克准则是确定开关式电源的输入滤波器是否导致不稳定性，或使电压编程DC-DC转换器开关式电源性能参数劣化的一种标准。 信号源： 任意波形/函数发生器 (内置到6系列MSO中) 台式电源 Picotest J2121A High Power线路注入器 配置： …
    时长: 03:13
    测量电源抑制比(PSSR)
    用实例说明怎样使用示波器测量电源抑制比，在本例中是线性稳压器。 电源抑制比或电源纹波抑制(PSRR)是衡量电路的电源抑制性能的指标，用输出噪声与输入噪声的对数比表示。 信号源： 任意波形/函数发生器 (内置到6系列MSO中) 台式电源 Picotest J2120A线路注入器 配置： 6系列MSO示波器 负载： DUT的输出上的DC负载
    时长: 01:34
    Low amplitude RF emission analysis with RF vs Time Triggering
    Low amplitude RF emission analysis with RF vs Time Triggering
    See how the RF vs Time hardware triggering capability (Spectrum View) on the 4, 5, and 6 Series MSO oscilloscopes can capture a low amplitude RF emission.  This video focuses on the low amplitude …
    时长: 4:23
    Finding root cause of EMI signals with Spectrum View
    Finding root cause of EMI signals with Spectrum View
    See how to track down the source of transient RF/EMI emissions with Spectrum View and the RF vs Time triggering capabilities. Clearly determine which PCB signals are causing EMI emissions so that …
    时长: 4:21
    Capturing a Clock Frequency Glitch With RF vs Time Trigger
    See how an edge trigger on the RF Frequency Deviation vs Time trace isolates and captures a short duration transient in the frequency of a clock signal.  The Spectrum View capability on the 4, 5 …
    时长: 1:55
    使用Spectrum view进行EMI诊断
    时长: 04:21
    Comparing phase on RADAR pulses with the 6 Series MSO
    Comparing phase on RADAR pulses with the 6 Series MSO
    An AWG70002B was used to create a pair of 20us wide RF pulse trains at 3.85GHz. One pulse train has a constant/unchanging phase – this is our reference and is applied to Ch1. The other pulse …
    时长: 3m 29s
    700uΩ有源2端口阻抗测量
    用实例说明怎样使用示波器和信号源，测量有源电源平面的毫欧级阻抗。 信号源： 任意波形/函数发生器 (内置到6系列MSO中) Picotest J2161A分路器 配置： Picotest J2102B共模同轴电缆变压器，用于隔离 6系列MSO示波器
    时长: 01:39
    Basic RF Measurements with the 3 Series MDO
    Basic RF Measurements with the 3 Series MDO
    With its built-in 1 GHz spectrum analyzer, the 3 Series MDO oscilloscope enables RF engineers to test the latest IoT devices using sub-GHz band without adding any extra cost. The basic RF …
    时长:
    2端口并联传送阻抗测量
    用实例说明怎样测量VRM(稳压器)模块上的2端口并联阻抗。 电源平面阻抗是评估功率完整性最常用的指标，2端口并联传送方法则是评估中采用的黄金标准。为了在需要大的瞬态电流期间使电源轨道电压保持在极限范围内，毫欧级电源平面阻抗必不可少。 信号源： 任意波形/函数发生器 (内置到6系列MSO中) Picotest J2161A分路器 配置： 6系列MSO示波器 …
    时长: 01:48
    Leveraging HSI with Python
    This video discusses the new Tektronix Python libraries - TekHSI and tm_data_types, how to install the new TekHSI Python libraries, some programming examples and how these new libraries compare to …
    时长: 10m 43s
    What is HSI?
    Watch this demo video to learn how Tektronix High Speed Interface (HSI) can boost performance speed to be much faster than traditional VISA- and SCPI-based waveform data transfer.
    时长: 6m 7s
    How Pre-Compensation Improves Signal Fidelity
    For RF design engineers, validation and verification engineers, or radar and EW systems engineers working on wideband radar systems, satellite communications systems, and other high-bandwidth RF …
    时长: 03:36
    TekScope 2.12 - What's New
    TekScope v2.12 includes a built-in screenshot capture feature, HSI enhancements supporting 2.5Gbps USB to ethernet adapters, digital power management, protocol decodes and more.  Watch this short …
    时长: 2m 22s
    Making Power Rail Measurements
    Making Power Rail Measurements
    See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO …
    时长: 0h 6m 15s
    Double Pulse Testing - Energy Loss Measurements
    The switching performance of power semiconductors is often characterized using double pulse tests. This testing is now being widely applied to GaN and SiC MOSFETs. This video explains how to use …
    时长: 7 minutes
    Wide Bandgap Device Validation
    Wide Bandgap Applications
    Wide Bandgap power devices (SiC and GaN) offer significant benefits and are smaller, faster and more efficient than their silicon counterpart. But they also present several validation challenges …
    时长: 24:07
    Time Domain Reflectometry Measurements and Analysis with 4, 5 and 6 Series MSO Oscilloscopes
    This video demonstrates Time Domain Reflectometry (TDR) measurements using a 6 Series MSO oscilloscope.  (TDR measurements are also available on 4 and 5 Series MSOs.) Having TDR measurements on …
    时长: 7
    Tektronix tm_devices V1.4 - What's New
    Watch this video to learn what's new in V1.4 of tm_devices - the Tektronix device management package that enables better control and usage of test & measurement devices in Python scripts.
    时长: 3m 47s
    Connect to an Oscilloscope Using tm_devices
    Combining the power of Python and Tektronix oscilloscopes makes complex testing procedures more efficient, accurate and customizable. This short video shows how to use tm_devices, the Tektronix …
    时长: 2m 5s
    Double Pulse Testing of Wide Bandgap Devices
    Watch a demonstration of the Wide Bandgap Double Pulse Test application (Opt. WBG-DPT) on the 5 Series B MSO oscilloscope. The application makes testing easier by providing precise double-pulse …
    时长: 1:07
    Multi-Channel Wireless Modulation Analysis
    See how oscilloscopes such as the 6 Series B MSO Mixed Signal oscilloscope are enabled by advanced features of Tektronix SignalVu-PC software to provide RF spectral and modulation analysis across …
    时长: 5:08
    CAN XL Decoding and Triggering with an Oscilloscope
    CAN XL is a third generation of CAN bus, designed to bridge gaps between existing CAN standards and higher data-rate standards such as Automotive Ethernet.  This short video shows how to set up …
    时长: 3m 45s
    Ripple noise measurement of Power supply
    时长:
    Automotive millimeter-wave radar signal analysis
    时长:
    Measuring Frequency Settling Time
    Frequency settling time, an essential measurement in the design and evaluation of programmable oscillators, phase locked loop circuits, RF synthesizers and more, becomes much easier when the …
    时长: 14:12
    1000BASE-T Gigabit Ethernet Testing with Disturber
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) transmitter (Tx) testing with a disturber.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software.  …
    时长: 6:38
    Exploring the Integrated Arbitrary Function Generator - 2, 4, 5, 6 Series MSOs
    Having an arbitrary/function generator built into your oscilloscope is useful and convenient. Learn about the AFG outputs available in 2, 4, 5 and 6 Series MSOs.
    时长: 4m 56s
    Logic and Mixed Signal Analysis
    Built-in logic analysis on mixed signal oscilloscopes expand visibility into digital systems. This video gives a quick overview of the logic probe, settings, triggering and searches.
    时长: 3m 4s
    Advanced Power Supply Measurements and Analysis with Tektronix Oscilloscopes
    Learn how the Advanced Power Supply Measurements and Analysis package for Tektronix oscilloscopes simplifies analysis of power conversion systems with automated power quality, harmonics, switching …
    时长: 7m 46s
    CAN Bus Decoding and Triggering
    This video covers the basics of CAN bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    时长: 5m 16s
    Oscilloscope Measurements on 3 Phase PWM Systems
    Making measurements on the PWM outputs of inverters and motor drives is challenging. Learn about automated 3-phase power measurement packages on 4, 5 and 6 Series B MSO oscilloscopes that deliver …
    时长: 7m 26s
    SPI Bus Decoding and Triggering
    This video covers the basics of SPI bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    时长: 5m 18s
    I2C Bus Decoding and Triggering
    This video covers the basics of I2C bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    时长: 5m 12s
    1000BASE-T Gigabit Ethernet Return Loss Demo
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) return loss testing.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software.  Hardware includes a …
    时长: 4:40
    1000BASE-T Gigabit Ethernet Testing Demo
    Watch a demonstration of 1000BASE-T (Gigabit Ethernet) testing.  Gayland Pounder, Tektronix Application Engineer, uses TekExpress software to perform the testing.  Hardware includes a Tektronix …
    时长: 6:32
    RF Analysis on 4_5_6 Series MSOs
    Overview of RF Analysis on Tektronix 4, 5 and 6 Series Mixed Signal Oscilloscopes
    Learn about the many types of RF analysis available on the 4, 5 and 6 Series MSOs, enabled by the patented integrated digital downconverters behind each channel. This overview touches on …
    时长: 1:51
    Python_Programming
    Test Automation and Python Programming
    Customers across all industries and applications are using automation to extend the capabilities of their oscilloscopes.  Here we cover what you need to get started programming scopes in Python.  …
    时长: 31:09
    TekScope V2-4 - Whats New
    Watch this short video to learn about the new features in TekScope version 2.4, including TekScope Basic – a new free tier license, maintenance licenses, fast frames with improved support, a new …
    时长: 4m 39s
    Gain Insights with the Spectrogram Feature of Spectrum View
    See how you can get more insight to transient and dynamic behavior of the spectral content of your signals. Using the new spectrogram feature, an enhancement of the RF vs time option for Spectrum …
    时长: 7:15
    Decoding Near Field Communications (NFC) on 4, 5 and 6 Series MSOs
    How to use Tektronix 4, 5 and 6 Series MSO oscilloscopes to decode and analyze Near Field Communications (NFC) wirelessly, using a near field probe and the RFNFC package on the instrument.
    时长: 6:02
    Electric Vehicle Charging - What's Ahead?
    With electric vehicles (EVs) increasingly becoming mainstream, the industry must create a convenient and reliable EV charging network to ensure driving adoption. Watch as we discuss what's coming …
    时长: 26:18
    What Is Driving the Power Electronics Market?
    Gain new insights into the field of power electronics including market overviews and an overview of new device technologies from Dr. Ana Villamor, Team Lead Analyst for power electronics, Yole …
    时长: 28:44
    New Test Techniques for Brushless Direct Current Motors
    Motor designers typically measure direct-quadrature-zero (dq0) using custom built embedded control software together with hardware having an FPGA for Field Oriented Control (FOC). This session …
    时长: 20:42
    SignalVu Spectrum Analysis Software
    Hear an overview of SignalVu, Tektronix's RF and vector signal analysis platform. Tektronix' spectrum analyzers and oscilloscopes combined with SignalVu uniquely allows you to view live spectral …
    时长: 00:12:51
    Ground Loops: What Are They, Why Should We Care, and How Can They Be Fixed?
    Power rail noise is one of the most significant sources of jitter in high-speed systems, phase noise in RF systems, and noise in A/D and D/A converters.  Semiconductor manufacturers are responding …
    时长: 27:30
    Double Pulse Testing: Smart Probing OR Cable Monster?
    Watch as we discuss techniques for properly testing Silicon Carbide (SiC) devices.  We'll review considerations for creating a double pulse test setup.  We offer an overview of basic equipment …
    时长: 30:05
    How Silicon Carbide Is Powering the Electric Vehicle Revolution
    Silicon carbide (SiC) MOSFETs are supplanting silicon IGBTs in the drivetrain inverter of battery electric vehicles. While today SiC claims only around 5% of the market, with the vast majority of …
    时长: 30:07
    Automotive Ethernet Signal Separation Demo
    Automotive Ethernet 100BASE-T1 Signal Separation and Protocol Decoding Demo
    A demonstration of 100BASE-T1 Automotive Ethernet protocol decoding on a 6 Series MSO oscilloscope.  This video shows how full-duplex 100BASE-T1 can be separated and decoded without breaking the …
    时长: 5:21
    CAN Bus Decode and Trigger on the 5 Series MSO
    CAN Bus Decode and Trigger on the 5 Series MSO
    This vides shows how to set up the 5 Series MSO mixed signal oscilloscope to work as a CAN bus decoder for automated CAN or CAN FD bus decoding, triggering, and search.
    时长: 2m 23s
    Jitter-from-Power_Supply
    Signal and Power Integrity
    Watch as panelists discuss emerging technologies and the feedback loop between signal integrity and power integrity. See how to combine jitter and power integrity analysis into a formidable tool …
    时长: 35:32
    How to Measure Power Rail Current with a Shunt Resistor
    How to Measure Power Rail Current with a Shunt Resistor
    Make extremely accurate power rail measurements using two Tektronix power rail probes, a Keithley DMM6500 touchscreen Digital Multimeter, and ultra-low-noise 6 Series mixed signal oscilloscope …
    时长: 0h 1m 46s
    SignalVu-PC Multi-Channel RF and Pulse Analysis
    See how RF design and validation engineers working on MIMO, phased-array and beam-forming systems can make fast, accurate pulse and phase measurements on as many as 8 channels using SignalVu-PC …
    时长: 4m 37s
    MIL-STD-1553 bus support
    MIL-STD-1553 bus support
    Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering …
    时长: 0h 3m 14s
    Simplify Multi-Channel RF Generation and Analysis
    Watch our Mixed-Signal Oscilloscope capturing multiple RF channels and performing RF analysis of radar pulses. Here we're taking advantage of the high-bandwidth and independent digital …
    时长: 57s
    USB4 Receiver Test Solution
    USB4 Receiver Test Solution
    Learn about our USB4 receiver testing solution which offers comprehensive coverage for compliance requirements outlined by the USB Implementers Forum or USB-IF to give you confidence that your …
    时长: 6m 24s
    Double Pulse Testing on Wide Bandgap Devices
    Double Pulse Testing of Wide Bandgap Devices
    Double-pulse testing is the standard method for measuring the switching parameters of MOSFETs or IGBT power devices. Historically it has been a time-consuming process. However, the Tektronix …
    时长: 5:17
    Latency Measurement: CAN to Ethernet
    Webinar: Automotive Wired and Wireless & RF Communication
    Learn about the domain/zonal controllers and discuss what changes it will bring for in-vehicle network architectures, highlighting some of the testing challenges measurement requirements. 
    时长: 57:08
    Tektronix Automotive Radar
    When making radar measurements, it is critical to have  synchronous measurements by a single digitizer. Watch our short video in which Alex Krauska, Solutions Engineer, demonstrates making four …
    时长: 2m 12s
    MIPI D-PHY C-PHY M-PHY
    MIPI C-PHY D-PHY Webinar
    MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobile applications.  Oscilloscope-based protocol layer validation enables isolating …
    时长: 31:33
    Automotive Ethernet PAM3 and Signal Separation Introduction
    Automotive Ethernet PAM3 and Signal Separation Introduction
    Automotive Ethernet with PAM3 introduces new test challenges. Tektronix' new, innovative, non-intrusive Signal Separation simplifies Automotive Ethernet testing and set-up, providing advanced …
    时长: 0h 8m 3s
    CAN - CAN FD Protocol
    CAN - CAN FD Protocol
    In this short video, we demo the CAN FD bus decoding process on the flexible MDO3000 oscilloscope. 
    时长: 4m 28s
    TekExpress Demo Multigigabit Ethernet
    A demonstration of TekExpress Automotive Ethernet, an automated application, for Automotive Multigigabit Ethernet (IEEE802.3ch) Compliance Testing.
    时长: 6:56
    Mixed Domain Analysis
    Spectrum View for Mixed Domain Analysis
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length and enables their Spectrum …
    时长: 29:31
    tekscope 1-44 - whats new
    TekScope V1.44 - What's New
    Watch this video learn about the new features in TekScope version 1.44, including RF analysis capabilities, added support for the MSO2000 and MSO2000B oscilloscopes, user interface improvements …
    时长: 8m 8s
    Time Correlated, Multi-Channel Analog/Digital/RF Signal Analysis Workshop
    In this workshop, Tektronix Senior Applications engineer Alan Wolke demonstrates how to perform time correlated multi-domain signal analysis across multiple channels with the Tektronix 6 Series B …
    时长: 34:07
    Testing Power Electronic Components Converters and Drives
    Testing Power Electronic Components Converters and Drives
    Do you have trouble making accurate current or voltage measurements? Are you able to make repeatable single ended, differential, and common mode measurements? Start making reliable power …
    时长: 1m 25s
    Tektronix 3 Series MDO vs Keysight Technologies DSOMSOX 3000T Series Oscilloscopes Measurement Compa
    Tektronix 3 Series MDO vs Keysight Technologies DSOMSOX 3000T Series Oscilloscopes Measurement Comparison
    The Tektronix 3 Series MDO and Keysight DSO/MSO 3000T X-Series use different techniques for making automated measurements.  The Tektronix 3 Series MDO calculates measurements and performs waveform …
    时长: 2m 16s
    Tektronix 3 Series MDO vs Keysight Technologies DSOMSOX 3000T Series Oscilloscopes Display Compariso
    Tektronix 3 Series MDO vs Keysight Technologies DSOMSOX 3000T Series Oscilloscopes Display Compariso
    A side-by-side comparison of the 11.6-inch HD display on the Tektronix 3 Series MDO and the 8.5-inch VGA display on the Keysight 3000T X-Series oscilloscope. The same I2C signals are shown on both …
    时长: 1m 7s
    Power Integrity Design and Debug Tools
    Power Integrity Design and Debug Tools
    Explore a collection of test and measurement tools chosen by Tektronix experts perfect for engineers working on power integrity. From measuring ripple on DC power rails to seeing noise on your …
    时长: 1m 26s
    Introducing the 5 Series MSO Mixed Signal Oscilloscope
    Introducing the 5 Series MSO Mixed Signal Oscilloscope
    Experience the 5 Series MSO, the scope that changes everything. 
    时长: 1m 3s
    Electrical Engineering Students Preview the 3 Series MDO
    Electrical Engineering Students Preview the 3 Series MDO
    Aspiring electrical engineers from Queensborough Community College got an early preview of the 3 Series MDO after using an earlier generation Tek scope in their lab class.  See (and hear) their …
    时长: 1m 40s
    Advanced Power Measurements with Tektronix Oscilloscopes and Picotest Accessories
    Advanced Power Measurements with Tektronix Oscilloscopes and Picotest Accessories
    This Picotest video gives a quick overview of the many power-related measurements that can be made using a Tektronix oscilloscope and Picotest accessories. Advanced power supply tests, such as …
    时长: 1m 49s
    Everyday Design and Debug with an MDO3000 Series Oscilloscope
    Everyday Design and Debug with an MDO3000 Series Oscilloscope
    See a few everyday examples of engineering tasks you can do with this ultimate 6-in-1 integrated instrument.
    时长: 6m 54s
    Engineers React to the 5 Series MSO Mixed Signal Oscilloscope
    Engineers React to the 5 Series MSO Mixed Signal Oscilloscope
    时长: 2:29
    5 Series MSO Highlights
    5 Series MSO Highlights
    Watch this short video to explore some of the great features of the new 5 Series MSO oscilloscope.
    时长: 5m
    Power Integrity Demo at embeddedworld2019
    Power Integrity Demo at embeddedworld2019
    Are you seeing ALL the noise from your power rails? Lee Morgan, Technical Marketing Manager in EMEA, demos one of our power integrity setups with a 6 Series MSO, our new Power Rail Probes, and an …
    时长: 0h 1m 27s
    Tips, Tricks, and Traps - Sharing Test Data across the Bench and into the Cloud Webinar
    This webinar compares different methods of untethering your instrument data from your bench. Accessing your data locally and remotely is discussed, from custom Python code to automatic cloud …
    时长: 46m 31s
    TekDrive Scope Collaboration in the Cloud Webinar
    TekDrive is a file sharing platform for storing, sharing, and collaborating on waveform and analysis data in a much more convenient, efficient, secure, and useful way. In this webinar, you will …
    时长: 47m
    Jitter Fundamentals
    Jitter Fundamentals
    View this recorded webinar to get a solid overview of jitter components as well as jitter characterization and visualization. Learn how to control Jitter during system design and improve timing …
    时长: 32m 54s
    Using Spectrum Time to View Turn On in Frequency Domain
    Digitizers and Software for High Energy Physics
    Watch as we demonstrate the use of digitizers having high signal integrity and software being used to reliably enable single shot and high-energy physics tests.
    时长: 41:56
    5G Vector Analysis MIMO-OTA Webinar
    Webinar on applications and trends and solving problems making measurements in 5G MIMO using a scope for wideband analysis.  A demonstration shows time and frequency correlation for a power …
    时长: 35:33
    5 Series B MSO Intro Webinar
    5 Series B MSO Oscilloscope Introduction Webinar
    In this webinar, Product Manager and engineer Brandon Gould runs through 5 demonstrations of the New 5 Series B MSO oscilloscope.  This is a great, detailed overview whether you’re researching the …
    时长: 53:25
    Video Fun with XYZ plots on the 5 Series MSO
    Video Fun with XYZ plots on the 5 Series MSO
    See what happens when you mix a brand new oscilloscope, an apps engineer, and his composite video separator. Yes, you’ll see video on the scope display. But you’ll also learn about using 16-bit …
    时长: 2m 39s
    Tips and techniques for setting up your Tektronix 4_5 or 6 Series MSO display
    Tips and techniques for setting up your Tektronix 4 Series, 5 Series or 6 Series MSO display
    Watch how easy it can be to setup and analyze waveform behavior using the highly intuitive touch interface. Setting up your measurement and debugging your system has never been easier with the …
    时长: 1:51
    Practical techniques workshop for Mixed Signal Oscilloscopes
    Tektronix Sr. Applications Engineer Alan Wolke leads a workshop on practical tips and techniques for Mixed Signal Oscilloscopes using the Tektronix 6 Series B MSO. - How to remotely access your …
    时长: 37:32
    Power Supply Rejection Ratio on an Oscilloscope
    Power Supply Rejection Ratio on an Oscilloscope
    Learn how to get optimal results from your power supply design by checking the power supply rejection ratio. This video covers how DC-DC  converters or low voltage drop-out regulators (LDOs) …
    时长: 0h 8m 55s
    How to Use Cursors for Manual Measurements
    How to Use Cursors for Manual Measurements
    Cursors provide a quick method for making manual measurements. Here's how to use them.
    时长: 58s
    How to use FastFrame Segmented memory on the 5 Series MSO oscilloscope
    How to use FastFrame Segmented memory on the 5 Series MSO oscilloscope
    Get a 6-minute introduction to the Fastframe segmented memory feature on the 5 Series MSO. FastFrame enables high-quality data with the efficient use of memory. Learn how to get off the ground …
    时长: 6m 7s
    How to use Callouts on 4 5 6 Series MSOs
    How to use Callouts on the 4 Series, 5 Series and 6 Series Mixed Signal Oscilloscopes
    Learn how to annotate test results and methods with “Callouts” for easily documenting important information when sharing data across a team, recreating a measurement at a later date, or delivering …
    时长: 1:42
    How to Use Oscilloscope Visual Triggers Build complex waveform triggers simply by drawing shapes
    How to Use Oscilloscope Visual Triggers Build complex waveform triggers simply by drawing shapes
    Learn how to quickly capture bursts just by drawing a couple of boxes, and how to apply logic and add more shapes to capture increasingly complex waveforms. See how visual triggers work on the 5 …
    时长: 4m 5s
    How to Use Wave Inspector to Search and Mark Events
    How to Use Wave Inspector to Search and Mark Events
    Learn how the Wave Inspector can help you quickly set up event searches and mark all occurrences across the record.
    时长: 1m
    How to Recall Built-in Demo Sessions
    How to Recall Built-in Demo Sessions
    The 5 Series MSO contains many built-in demo examples. Here are just a few of them.
    时长: 39s
    How to Set Up Bus Decode and Triggering
    How to Set Up Bus Decode and Triggering
    Learn how to quickly trigger and decode serial busses.
    时长: 41s
    How to Find Signal Anomalies
    How to Find Signal Anomalies
    The FastAcq feature provides a quick method of finding even the most elusive signal events.
    时长: 101717 - 0:39
    How to change the font size on the 4 Series 5 Series or 6 Series MSO display
    How to change the font size on the 4 Series, 5 Series or 6 Series MSO display
    Watch how to easily change the font size used on your 4/5/6 Series MSO with just a few clicks. This will make it easier to read measurement values at a distance from your scope or maximize the …
    时长: 1:27
    How to Install 5 Series MSO Firmware
    How to Install 5 Series MSO Firmware
    This video demonstrates how to update the firmware on the 5 Series MSO.
    时长: 2m 29s
    How to Make Automated Measurements
    How to Make Automated Measurements
    Automated measurements provide quick, precise insights with a simple drag-and-drop.
    时长: 41s
    Finding anomalies on a 6 Series B MSO Oscilloscope
    Finding anomalies on a 6 Series B MSO Oscilloscope
    Learn how fast waveform update rates help uncover intermittent signal anomalies, and advanced triggering and search techniques can determine how often they occur.   For more information on the new …
    时长: 2m 6s
    Getting SignalVu PC running on 5_6 Series MSOs
    How to get up and running with SignalVu-PC on the 5 and 6 Series MSO
    Learn how to configure and get started with SignalVu-PC software and 5 and 6 Series MSOs for vector signal analysis.
    时长: 2:42
    Analyzing turn on behavior of a spread spectrum clock with Spectrum View on 4_5_6 Series
    Analyzing turn on behavior of a spread spectrum clock with Spectrum View on 4, 5 and 6 Series
    See how Spectrum View provides ease-of-use and the ability to achieve optimal views in both RF and Time domains simultaneously when analyzing the turn on behavior of a spread spectrum clock.  This …
    时长: 2:32
    400G PAM4 Debug Validate
    400G PAM4 Debug Validate
    Find the most comprehensive solution available for PAM4 analysis. Find out about the advanced equalization and digital clock recovery, effective error rate analysis, and offline analysis available …
    时长: 1m 51s
    3 Phase Inverter Motor Drive Analysis IMDA on 5 Series MSO
    3 Phase Inverter Motor Drive Analysis (IMDA) on the 5 Series MSO
    During the design and validation of systems that utilize 3 Phase power, it can be difficult to correlate control systems and power electronics with the performance of the overall system. Watch how …
    时长: 2:45
    MSODPO5000B Series vs Agilent MSODSOX 4000A Series Visual Trigger
    MSODPO5000B Series vs Agilent MSODSOX 4000A Series Visual Trigger
    This is a side-by-side comparison of the Visual Trigger option on the Tektronix MSO/DPO5000 Series and Zone Triggering on the Agilent DSO-X 4000A Series oscilloscopes.  Find out how MSO/DPO5000 …
    时长: 3m 30s
    MSODPO5000B Series vs Agilent MSODSOX 4000A Series Overview
    MSODPO5000B Series vs Agilent MSODSOX 4000A Series Overview
    This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes.  The capabilities of each oscilloscope are evaluated as we walk through the …
    时长: 5m 24s
    MSODPO5000B Series vs Agilent MSODSOX 4000A Series Search and Measurement Comparison
    MSODPO5000B Series vs Agilent MSODSOX 4000A Series Search and Measurement Comparison
    This is a side-by-side comparison of the Tektronix MSO/DPO5000 Series and the Agilent DSO-X 4000A Series oscilloscopes, focusing on the search and measurement functionality of each instrument for …
    时长: 6m 15s
    Making High Resolution Measurements using a Tektronix MSO5000B vs Teledyne LeCroy HDO4000
    Making High Resolution Measurements using a Tektronix MSO5000B vs Teledyne LeCroy HDO4000
    This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Teledyne LeCroy HDO4000.
    时长: 5m 27s
    Making High Resolution Measurements Tektronix MSO5000B vs Agilent 9000H
    Making High Resolution Measurements Tektronix MSO5000B vs Agilent 9000H
    This video shows some examples of high-resolution measurements using a Tektronix MSO5000B and Agilent 9000H.
    时长: 7m 13s
    Oscilloscope Analysis Software
    TekScope Software for Entry Level Oscilloscopes
    Learn how using TekScope software together with entry-level  oscilloscopes enables far greater insight into the data captured and far more powerful analysis and sharing capabilities than might be …
    时长: 21:00
    TekScope Datalogging
    TekScope Datalogging
    TekScope PC software, combined with Tektronix oscilloscopes, makes it easy to log waveform data, waveform images and measurements on your PC.  Simply set the logging interval, count, and hit Start …
    时长: 5m 29s
    TDR techniques Eliminate Power Integrity Issues
    TDR Measurements for Power Integrity
    See how you can use TDR (Time Domain Reflectometry) techniques to better understand power integrity issues and more quickly eliminate issues, like ripple, from your system designs.
    时长: 25:29
    RF Triggering
    Triggering on RF Frequency Changes with Spectrum View Spectrum Analysis (3 of 3)
    See how Spectrum View's triggering functionality can be used together with the independent control of time and frequency domains to capture infrequent anomalies.  Additional videos: Spectrum View …
    时长: 7:19
    Multi-Channel Spectrum View
    Using Spectrum View Spectrum Analysis on Multiple Channels (2 of 3)
    For complex troubleshooting, Spectrum View is available on multiple channels.  With all Spectrum Time indicators locked and moving together you can see time correlated spectrums across all …
    时长: 4:56
    SpectrumAndTimeDomain
    Spectrum View Spectrum Analysis and How it Differs from Traditional Oscilloscope FFTs (1 of 3)
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length. This enables their Spectrum …
    时长: 3:35
    SENT Bus Decode and Trigger on 5 Series MSO
    SENT Bus Decode and Trigger on 5 Series MSO
    This video shows how to set up automated SENT bus (also known as SAE J2716) decoding, triggering, and search on the 5 Series MSO mixed signal oscilloscope.
    时长: 2m 57s
    Resolution Techniques Comparison Tektronix MSO5000B vs Keysight SSeries
    Resolution Techniques Comparison Tektronix MSO5000B vs Keysight SSeries
    Measuring a small signal imposed on a much larger one requires enough vertical scale to capture the large signal, and enough resolution to see the small one.  This video shows some best practices …
    时长: 8m 21s
    Cable Pre-Compensation
    Improve Waveform Quality with Pre-Compensation
    See how the pre-compensation feature found on Tektronix Arbitrary Waveform Generators can correct for the negative effects of cables, components, and fixtures on the amplitude and phase of high …
    时长: 6:05
    Beamforming
    MIMO Processing for Beamforming Analysis
    See how the 4, 5, and 6B Series of MSO oscilloscopes provide a platform for multichannel test and measurement of MIMO systems through extension of MATLAB® algorithms for analysis of channel …
    时长: 24:54
    Measuring Sub-milliohm Impedance
    Making VNA Measurements Confidently
    Get tips on measuring sub-milliohm impedance on a board at low frequencies across surface mount capacitors. See how this VNA measurement is made using a Tektronix 6B Series MSO oscilloscope …
    时长: 15:36
    Looking at Analog Digital and Serial Data Simultaneously with a 6 Series B MSO
    Looking at Analog, Digital and Serial Data Simultaneously with a 6 Series B MSO
    See how a 6 Series B MSO can display a decoded serial bus, analog waveforms, and digital timing information for a rich view of your systems. This video shows a decoded SPI bus.   For more …
    时长: 2:06
    High Speed Serial and Jitter Test for 6 Series B MSO
    High Speed Serial and Jitter Test for 6 Series B MSO
    This demonstration shows the very quick jitter summary on the 6 Series B MSO, which includes an eye diagram, TIE histogram and spectrum, and bathtub plot.   For more information on the new 6 …
    时长: 01:58
    Demonstration of Low Noise and High Resolution of 6 Series B MSO
    Demonstration of Low Noise and High Resolution of 6 Series B MSO
    This demonstration shows the clean capture of a small detail with extremely low noise, even on a signal that spans hundreds of volts.   For more information on the new 6 Series B MSO visit here.
    时长: 01:54
    Demonstration of Automated Automotive Ethernet Compliance Test System
    Demonstration of Automated Automotive Ethernet Compliance Test System
    Test automation may be used to check automotive Ethernet transmitters for compliance with the BroadR-Reach, 100BASE-T1 (P802.3bw), and 1000BASE-T1 (802.3bp) standards. This demonstration shows the …
    时长: 0h 4m 52s
    DPO7000 Series Digital Phosphor Oscilloscope Virtual Product Demo
    时长:
    Cross-Domain Troubleshooting
    Cross-Domain Troubleshooting
    Watch this demonstration showing how the 6 Series B MSO oscilloscope offers the industry’s best solution for debugging with the ability to optimize fully correlated RF (spectrum) and time-domain …
    时长: 4:38
    Adjacent Channel Power
    5G New Radio Vector Signal Analysis
    Watch to learn how you can simplify several 3GPP 5G New Radio transmitter tests. You’ll see how to verify transmitter characteristics including power, power dynamics, signal quality and RF …
    时长: 8:50
    5G Validation & System Debug
    5G Validation and System Debug
    Learn how to perform multi-domain signal analysis of 5G base station and user equipment systems.  See the benefits of using a mixed domain oscilloscope for analyzing RF amplifier performance.  …
    时长: 6:47
    MIMO analysis of RF, analog and digital
    5G Over the Air Measurement
    See how MIMO analysis of RF, analog and digital can be performed simultaneously for easy analysis and correlation between both the frequency and time domain while addressing the unmet needs of the …
    时长: 51:53
    3 Series MDO Oscillosocpe
    3 Series MDO 6-In-1 Capabilities
    Learn how a modern oscilloscope can provide six different capabilities: 1)Oscilloscope; 2) Spectrum Analyzer; 3) Protocol Analyzer; 4) Logic Analyzer; 5) AFG; 6) DVM/counter.
    时长: 21:35
    MDO3000 Exceptionally Wide Capture Bandwidth
    MDO3000 Exceptionally Wide Capture Bandwidth
    Discover the exceptionally wide capture bandwidth of the integrated spectrum analyzer found in the MDO3000 Series Mixed Domain Oscilloscope.
    时长: 3m 24s
    MDO3000 Integrated Protocol Analyzer
    MDO3000 Integrated Protocol Analyzer
    Debug Your Serial Buses in Seconds with the Integrated Protocol Analyzer.
    时长: 2m 58s
    MDO3000 Mixed Domain Oscilloscope
    MDO3000 Mixed Domain Oscilloscope
    The MDO3000 Mixed Domain Oscilloscope features six integrated instruments, including a spectrum analyzer, function generator and more, giving you the ability to capture analog, digital and RF …
    时长: 56s
    MDO3000 Integrated Logic Analyzer
    MDO3000 Integrated Logic Analyzer
    Monitor More of Your Design with the Integrated Logic Analyzer.
    时长: 2m 48s
    MDO3000 Integrated Spectrum Analyzer
    MDO3000 Integrated Spectrum Analyzer
    Uncover Noise Sources and Debug Wireless with the Integrated Spectrum Analyzer.
    时长: 3m
    MDO3000 Integrated Digital Voltmeter
    MDO3000 Integrated Digital Voltmeter
    Perform Quick Measurements with the Integrated Digital Voltmeter.
    时长: 1m 50s
    MDO3000 Integrated AFG
    MDO3000 Integrated AFG
    Generate a Wide Range of Signals with the Integrated Arbitrary/Function Generator.
    时长: 2m 31s
    MDO3000 Industry Leading Scope
    MDO3000 Industry Leading Scope
    Find Elusive Signal Problems with the MDO3000 Mixed Domain Oscilloscope.
    时长: 2m 39s
    How to Measure Switching and Magnetic Losses
    How to Measure Switching and Magnetic Losses
    This video looks at how to minimize power losses at the component level and optimize the overall efficiency of a power system. The primary causes of power loss in a power system are the power …
    时长: 1m 51s
    How to Measure Converter and Inverter Power Efficiency
    How to Measure Converter and Inverter Power Efficiency
    Testing power quality is a critical part of any power design process. In this video, our Tektronix expert shares tips and tricks for using an oscilloscopes or power analyzer during design and …
    时长: 2:55
    6 Series MSO Channel-to-Channel Phase Measurements
    Channel-to-channel Phase Measurements using a 4, 5 or 6 Series MSO
    This quick demonstration shows in real-time how phase relationships change based on the relative position of antennas. The phase-coherent digital downconverters (DDCs) in a 6 Series MSO …
    时长: 2:09
    TekScope Version 1-40 - Whats New
    TekScope Version 1.40 - What's New?
    Watch this video to learn about the new features in TekScope version 1.40, including continuous acquisition, license expiration notification, and IMDA-MECH and WBG-DPT in the pro automotive and …
    时长: 7m 19s
联系技术支持 申请部件 支持论坛
Looking for a Manual for very old Tektronix product? View this link : Find legacy Manuals