联系我们

与泰克代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

产品支持和下载

欢迎访问泰克产品支持

虽然我们很愿意与您全天“讨论技术问题”,但我们知道您时间宝贵。因此,我们简化了流程,让您可以轻松下载所有当前产品以及许多停产产品的手册、产品技术资料和软件。只需告诉我们您使用的是哪种产品,我们就会向您显示所有相关信息。

您选择的产品型号当前有售。 提供了以下支持信息。

  • 产品技术资料 文献编号: 发布日期
    TriMode™ 探头家族
    P7700 系列 TriMode 探头为实时示波器提供了很高的探头保真度。此外,凭借连接创新技术,如焊接尖端中探头输入缓冲器只安装在距尖端末端几毫米的地方,P7700系列探头为连接当今最具挑战性的电子设计提供了无可比拟的易用性。
    51C-60283-10
  • 软件 文档类型 部件号: 发布日期
    P7700 SERIES PROBES FIRMWARE UPGRADE - V4.0
    P7700 Series TriMode Probes firmware, version 4.0. Any P7700 series probes not running version 4.0 or higher firmware should be upgraded. The firmware file should be downloaded and placed on a Tektronix performance oscilloscope. Using the Tektronix …
    固件 066186502
    P7700 SERIES PROBES FIRMWARE UPGRADE - V3.0
    P7700 Series TriMode Probes firmware, version 3.0. Any P7700 series probes not running version 3.0 or higher firmware should be upgraded. The firmware file should be downloaded and placed on a Tektronix performance oscilloscope. Using the Tektronix …
    固件 066186501
  • In this video we look at a topic that is becoming increasingly important in the high-speed serial industry—how to perform embedded measurements at the IC or PCB level using probes.
    时长:
    Learn how to dramatically cut down test time on required compliance interop tests for USB3 using an automated test suite from Tektronix. 
    时长:
    This short video shows how to debug a compliance measurement that has failed by using Tektronix’ Jitter and Eye Diagram Software, DPOJET. Using DPOJET, engineers can go from a compliance …
    时长:
    The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …
    时长:
    The MSO/DPO70000 Series oscilloscope delivers exceptional signal acquisition performance and analysis capability. Discover your real signals and capture more signal details with the industry's …
    时长:
    Finding the right filter settings for your optical TDECQ and NRZ measurements can be a pain on conventional solutions. With the new real-time O to E’s (DPO7OE Series) from Tektronix changing the …
    时长:
    Find out how new PAM4 software updates including full noise decomposition enable you to ensure your designs comply with the latest changes in compliance standards. 
    时长:
    See the versatility of our high-speed optical-to-electrical converters (DPO7OE1 and DPO7OE2 Optical Probes) for 200G and 400G PAM4 measurements. Multiple high-speed acquisitions of long pattern …
    时长:
    In this video you will learn how easy it is to recover a clock on an optical PAM4 signal and display an eye. The DPO7OE1 and DPO7OE2 is the perfect solution for optical high-speed measurement …
    时长:
    Take a look at Tektronix complete 400G coherent optical test system recently on display at OFC. It includes next generation signal generation, modulation, acquisition, and analysis.
    时长:
    Tackle today's high-speed serial signals and tomorrow's too with the scalable, flexible DPO70000SX series. Watch this short video to see how.
    时长:
    The NEW P7700 Series TriMode Probe provides the highest probe fidelity available for real-time oscilloscopes. Watch our 60-second video to see how this new probe can help minimize noise and easily …
    时长:
    End to end measurement solutions from Tektronix enable researchers and designers to comprehensively and swiftly analyze, debug and test cutting-edge technology with greater speed and precision …
    时长:
    Get an overview of the optical solutions available from Tektronix. Learn about what we showcased at our OFC 2016 exhibit, then learn more about these solutions online.
    时长:
    Description: Learn what's new in SAS1-4 and SATA testing. You'll gain an understanding of the latest SAS and SATA versions, and their implications for both transmitter and receiver testing.
    时长:
    This webinar will explain how to prepare for next generation DDR-based memory testing. Learn about the changes these new standards bring to electrical verification and how to prepare for proper …
    时长:
    This webinar will show how Cadence and Tektronix can enable you with flexible and power efficient DDR4 IP, design and analysis tools used in the office, and lab-based solutions to address the key …
    时长:
    View our webinar, Choosing the Best Test Setup for Thunderbolt™️ Compliance Testing, and learn which test setup is best suited for your Thunderbolt 3 and Thunderbolt 4 design. 课件:Choosing the Best …
    时长: 49:59
    探索测试LPDDR5X,这是JEDEC最新的低功耗内存规范。深入了解最新一代低功耗内存的新变化和保持不变之处,并了解Tektronix是如何应对LPDDR5X测试挑战的。
    时长:
    随着技术的进步和数据传输需求的增加,了解PCI Express 6.0电气设计和验证的最新最佳实践至关重要。来自Tektronix、Synopsys和Anritsu的专家将讨论设计高速互连的未来的关键考虑因素,从了解最新的技术演进到利用先进的仿真和测试方法。
    时长:
    DisplayPort v2.1(DP2.1)规范和合规性测试要求的发布引入了独特的挑战,需要一种新的测试方法来减少不断增长的测试时间。本次演讲钟,我们将简要介绍DP2.1得测试挑战及全新测试解决方案。
    时长:
    自动驾驶和互联车辆正在推动更高速度的车载网络。我们提供的视频演讲和课件对最新的 汽车多比特以太网(10Gbps)符合性测试 的新测量要求进行了深入探讨,探讨了MultiGBASE-T1(IEEE 802.3ch)的测试案例,以及工程师在测试设置和执行期间可能遇到的陷阱。除了符合性测试,还将介绍系统级噪声测试,使用非侵入式的信号分离方法,对100BASE-T1进行协议解码和信号完整性分析。 …
    时长: 55m 37s
    USB4V2标准提供了诸多优势,包括更高的数据传输速度、更好的电力传输和增强的安全措施。在本次会议中,您将了解为何USB4V2采用了PAM-3信号传输。我们将介绍测试PAM-3信号时面临的挑战,以及为物理层测试引入的测量方法和测试变化(包括发送端和接收端)。
    时长:
    Overview of system with DPO70000SX system for both electrical and optical PAM4 solutions.
    时长: 2m 16s
    Overview of the Tektronix 400G-ZR Coherent Optical Modulation Analyzer.
    时长: 3m 19s
    Prepare for the next PCI Express inflection point by viewing this discussion of validation requirements for PCI Express Gen6.  We review newly introduced transmitter measurements including SNDR …
    时长: 61:49
    TekScope v2.12 includes a built-in screenshot capture feature, HSI enhancements supporting 2.5Gbps USB to ethernet adapters, digital power management, protocol decodes and more.  Watch this short …
    时长: 2m 22s
    Watch to view an introduction to TeKExpress Thunderbolt, our automation solution for Thunderbolt transmitter testing for Thunderbolt 3 and Thunderbolt 4.
    时长: 05:53
    View our USB4 Compliance and Characterization Test webinar to learn how you can address the measurement challenges associated with the new USB4 standard.
    时长: 22m 14s
    Watch the webinar, How to Solve Key LPDDR5 DRAM Test Challenges, for test tips and techniques to meet the design challenges posed by this mobile memory standard.
    时长: 45:30
    While they promise to provide datacenters with large amounts of data at faster speeds and lower power consumption, DDR5 memory devices have unique test challenges.  Learn about characterization …
    时长: 17:55
    With the approaching ratification of 802.3ck, electrical characterization needs are particularly increasing. This demo highlights next-generation testing for end-to-end characterization of a 53 …
    时长: 2:08
    Watch this video to learn what's new in V1.4 of tm_devices - the Tektronix device management package that enables better control and usage of test & measurement devices in Python scripts.
    时长: 3m 47s
    Combining the power of Python and Tektronix oscilloscopes makes complex testing procedures more efficient, accurate and customizable. This short video shows how to use tm_devices, the Tektronix …
    时长: 2m 5s
    See how oscilloscopes such as the 6 Series B MSO Mixed Signal oscilloscope are enabled by advanced features of Tektronix SignalVu-PC software to provide RF spectral and modulation analysis across …
    时长: 5:08
    See how SignalVu VSA software offers insight into MIMO and Phased Array RADAR systems at frequencies and bandwidths up to 70 GHz on up to 4 channels. SignalVu VSA software enables a multi-channel …
    时长: 9:41
    See how SignalVu VSA software version 5.3 paired with a Tektronix DPO70000SX or MSO/DPO70000DX Series oscilloscope makes an excellent choice for validating a MIMO phased array RADAR because of the …
    时长: 5:28
    Customers across all industries and applications are using automation to extend the capabilities of their oscilloscopes.  Here we cover what you need to get started programming scopes in Python.  …
    时长: 31:09
    Watch this short video to learn about the new features in TekScope version 2.4, including TekScope Basic – a new free tier license, maintenance licenses, fast frames with improved support, a new …
    时长: 4m 39s
    Witness the world's first PCIe Gen6 receiver link training test, exhibited by Anritsu at the June 2023 PCI-SIG Developer’s Conference and featuring the Anritsu MP1900A BERT, Tektronix DPO70000SX …
    时长: 01:59
    See our demonstration of new PCIe® 6.0 Rx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges.  The January …
    时长: 2:25
    View what’s beyond PCIe Gen6 with this 128 GT/s system, a joint showcase created by Tektronix and Synopsys at the June 2023 PCI-SIG Developer’s Conference. Synopsys’ Madhumita Sanyal, Sr. Staff …
    时长: 01:16
    Hear an overview of SignalVu, Tektronix's RF and vector signal analysis platform. Tektronix' spectrum analyzers and oscilloscopes combined with SignalVu uniquely allows you to view live spectral …
    时长: 00:12:51
    See how a team at Wuppertal University in Germany is developing innovative new technologies that will underpin 6G networks. The team is relying on fast, synchronously running instruments as well …
    时长: 5:44
    Are you trying to build high fidelity wideband signal environments? Are you struggling to pick up on notoriously difficult to detect wideband signals? This webinar will focus on the challenges …
    时长: 1h 2m 35s
    Join Pavel Zivny and David Bouse, Tektronix' Principal Technology Leads for Ethernet and PCI Express respectively, as they discuss developments in 112 Gigabit Ethernet, PCI Express Gen6, PAM4 …
    时长: 6:56
    Watch our review of the physical layer specification as well as compliance test and troubleshooting of the new IEEE 802.3ck Ethernet standard, with particular focus on the AUI interfaces test. The …
    时长: 41:09
    This webinar presents an overview of reference clock jitter requirements as they have evolved and offers techniques for making these low femtosecond measurements using a real time oscilloscope. 
    时长: 53:02
    See our demonstration of new PCIe® 6.0 Tx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges.  The January …
    时长: 2:12
    Cloud-based computing power, storage capacity, and network bandwidth have led to the development of the PCI Express 5.0 specification for 32.0 GT/s. This webinar starts with an overview of 5.0 …
    时长: 44:47
    Listen as Joey Chiu, Tektronix PCI Express Applications Engineer, discusses PCI Express Gen5 Receiver (Rx) calibration. He covers how to prepare for it, what to expect, troubleshooting, and how to …
    时长: 23:15
    Watch as David Bouse explains the evolution of PCI Express from Gen5 to Gen6. Then hear from Pavel Zivny as he and David discuss PAM4 signaling in PCIe and how it compares with PAM4 as applied in …
    时长: 1:00:00
    Learn how you can address five of the thorniest measurement challenges associated with the new DDR5 standard. Get an update on the DDR5 Rx/Tx compliance test and insight in the latest …
    时长: 56:20
    Watch as the TekExpress DDR Tx Automation Software Solution for LPDDR5  is set up to match the hardware configuration for burst detection of a Device Under Test (DUT) and reporting of results.
    时长: 07:45
    Learn about changes to the official USB4 compliance test fixtures available from Wilder Technologies and the impact those changes will have on how tests are physically configured and what …
    时长: 4:04
    For performing jitter analysis, typically the oscilloscope should acquire wave forms at the maximum sample rate.  Learn about the ramifications of having the horizontal acquisition setup for …
    时长: 04:10
    Learn about our USB4 receiver testing solution which offers comprehensive coverage for compliance requirements outlined by the USB Implementers Forum or USB-IF to give you confidence that your …
    时长: 6m 24s
    Watch PCIe Gen 5 Receiver Automated Test Solution and the CEM test application. The specification requires the stressed eye calibration to be carried out over an optimum channel and other adjusted …
    时长: 05:01
    Watch our webinar on the latest Rev 1.0 requirements for validation of a 6.0 capable SerDes design including SNDR and RLM measurements of transmitters and stressed eye calibration for receiver …
    时长: 56:53
    Watch the webinar, PCI Express Gen 5: Solving 32 GT/s Receiver Compliance and Validation Challenges, to hear Tektronix’ David Bouse and Antritsu’s Hiroshi Saito offer insights into receiver …
    时长: 52:15
    Learn about the current challenges in testing optical transceivers in a high volume manufacturing setting, and see a demonstration of a transceiver test system for PAM4 characterization using the …
    时长: 34:04
    Get a high level look at TekExpress DDR Automation Testing Solution for system level testing of DDR5/LPDDR5. We show how to enter device definition, electrical and timing parameters to measure …
    时长: 5:39
    Watch Tektronix’ Pavel Zivny and Ali Emsia at the ECOC 2022 Ethernet Alliance booth as they discuss an 800G link based on an IEEE 802.3ck 100G per lane standard and measured by the Tektronix …
    时长: 2:04
    Learn about the domain/zonal controllers and discuss what changes it will bring for in-vehicle network architectures, highlighting some of the testing challenges measurement requirements. 
    时长: 57:08
    MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobile applications.  Oscilloscope-based protocol layer validation enables isolating …
    时长: 31:33
    A demonstration of TekExpress Automotive Ethernet, an automated application, for Automotive Multigigabit Ethernet (IEEE802.3ch) Compliance Testing.
    时长: 6:56
    Flex Long Reach Solder Down (FLR) Probe Tips from Tektronix have an increased length to provide a longer reach to the target from the probe connection.  A primary use case for these FLR tips is …
    时长: 3:20
    Watch this video learn about the new features in TekScope version 1.44, including RF analysis capabilities, added support for the MSO2000 and MSO2000B oscilloscopes, user interface improvements …
    时长: 8m 8s
    Learn how to install a license, either fixed or floating, on DPO/MSO70000C, DPO/MSO70000DX and DPO70000SX oscilloscopes.     
    时长: 2:38
    This video highlights some of the newest features and capabilities of the USB 3.1 Receiver testing application. These updates enhance the functionality of the software, and give users more tools …
    时长: 5m 25s
    The USB 3.1 Receiver application's Margin Test feature gives engineers quantitative answers on a design's performance and as a debug tool, a better understanding of where devices fail. This video …
    时长: 3m 34s
    This video focuses on the Link Training Status State Machine UI feature of the USB 3.1 Gen2 Receiver test application and shows the path that is taken by a device being trained into loopback mode …
    时长: 4m 35s
    The physical setup for USB 3.1 receiver calibration and testing is shown in this video.
    时长: 4m 33s
    Prepare for the new challenges in optical networking. During this webinar, experts will address critical design issues posed by integrating optical PAM4 capabilities into optical networking …
    时长: 48m 56s
    This video shows the strength of the DPO70000SX Oscilloscope for Wideband RF measurements with great noise density and low EVM measurements. See the performance of the DPO70000SX for yourself!
    时长: 2m 16s
    The DPO70000SX Oscilloscope has very good jitter noise floor. This is important when making critical timing margin measurements on fast devices or silicon. In this video we will see what the Time …
    时长: 1m 50s
    Watch this video to get an overview of the new Link Training Tool, which forms part of the expanded analysis software for Tektronix DPO70000SX oscilloscopes. Link Training helps engineers to …
    时长: 1m 31s
    See the latest example of Tektronix history of innovation with this informative video as CTO Kevin Ilcisin discusses the expected benefits of newly patented Asynchronous Time Interleaving being …
    时长: 4m 56s
    This demonstration of THz wireless transmissions is in collaboration with research professors from the Institute of Electronics, Microelectronics and Nanotechnology in France, who are performing …
    时长: 2m 58s
    Prof. Dr. Ullrich Pfeiffer of Wuppertal University explains why his team chose Tektronix for their 6G research into making possible increased data rates using multiple channels and balancing speed …
    时长: 0:58
    Learn how to open closed eyes using equalization techniques and how to de-embed reflections and loss caused by the measurement setup using SDLA Visualizer for Tektronix Real-Time Oscilloscopes.
    时长: 30m 56s
    Our Tektronix domain experts, Dan Froelich and Pavel Zivny, contrast the methodologies of the PCI Express 4.0/5.0 and IEEE 26 GBd NRZ/PAM4 electrical specifications and engage in a lively …
    时长: 1h 1m 36s
    PCI Express I/O bandwidth has doubled every 3 years on average thereby leading to an increased demand for this full duplex high speed bus architecture. As the industry begins deploying the 5.0 …
    时长: 50:45
    Watch as experts from Anritsu, Synopsys, and Tektronix participate in a panel discussion on the evolution of SerDes validation. They also offer an overview of the new tools and measurement …
    时长: 51m 23s
    Watch as we discuss PAM4 optical transceivers, both 100G and 400G, including the latest on standards, testing, and characterization. We cover high throughput NRZ measurement and margin and compare …
    时长: 1:00:07
    The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …
    时长: 1h 12s
    The rapid growth of ever-more powerful mobile devices, and the adoption of new wireless technologies such as 802.11ac, has enterprise networks struggling to keep pace. To meet these rising …
    时长: 27m 16s
    This webinar features Tektronix expert, Dorine Gurney, sharing her insights on the key factors to consider when performing transmitter testing to IEEE 802.11ad. Topics covered include:• What are …
    时长: 24m 54s
    This Tektronix webinar will teach engineers how to use modeling tools to correlate simulations with high-speed physical layer measurements on Serial Bus Standards using the DPO/MSO70000 Series …
    时长: 27m 39s
    HDMI specification version 2.1 is the most recent update of the HDMI standards and supports a range of higher video resolutions and refresh rates, including 8K60 and 4K120. Watch this …
    时长: 21:02
    As design margins shrink, accurate and standard-specific measurement is key to debugging, verifying design and performing interoperability testing when designing PCIe devices. Having confidence in …
    时长: 53m 34s
    This webinar discusses how designers and test engineers can determine the most effective optical test strategies for 400G Optical Standards. Learn where PAM-2 and PAM-4 fits, PAM-4 specific Mask …
    时长: 36m 10s
    Learn about the coherent modulation being considered for 400G networks, the key building blocks of a coherent test system, how to optimize measurement accuracy and the benefits of customizable …
    时长: 42m 47s
    Learn how to address the test and measurement challenges posed by PCIE Gen1-5 for both base silicon testing and CEM compliance testing. Gain insights and solutions for automation, validation, and …
    时长: 41m
    Get a view into next generation datacenter technology. After an overview, we dive into the signal analysis of coherent links.
    时长: 24m 53s
    With PAM4 moving into production and 400G design efforts in full swing, the test challenges around characterization, verification and debug, and manufacturing testing have never been greater. This …
    时长: 18m 33s
    Find out how the Tokyo Metropolitan Industrial Technology Research Institute (TIRI) reduced their testing time of wideband signals like IEEE 802.11ad with the Tektronix DPO70000SX. Previously …
    时长: 3m 43s
    The UltraSync architecture provided with DPO70000SX series oscilloscopes allows you to connect two or more oscilloscopes together to easily add acquisition channels while maintaining channel-to …
    时长: 4:59
    This video highlights the benefits, and proper use, of external attenuation with the 70GHz DPO70000SX Series Oscilloscope. See how measurement signal fidelity can be improved with easy-to-use …
    时长: 4m 27s
    This video shows the spurious-free dynamic range on the DPO70000SX Oscilloscope. Illustrated is how the scope’s dynamic range is performing using 40GHz tones sent into the instrument on a 5GHz …
    时长: 2m 37s
    Watch as we demonstrate the  “User Defined Acquisition Mode” feature included as part of Tektronix's TekExpress DDR5 and LPDDR5 testing solution. With the User-Defined Acquisition Mode, or UDA, a …
    时长: 04:46
    TekScope PC software, combined with Tektronix oscilloscopes, makes it easy to log waveform data, waveform images and measurements on your PC.  Simply set the logging interval, count, and hit Start …
    时长: 5m 29s
    See how the pre-compensation feature found on Tektronix Arbitrary Waveform Generators can correct for the negative effects of cables, components, and fixtures on the amplitude and phase of high …
    时长: 6:05
    This video highlights the benefits of using the DPO70000SX real time oscilloscope-based system for 400G optical/electrical PAM-4 debug and analysis.
    时长: 4m 3s
    See how the 4, 5, and 6B Series of MSO oscilloscopes provide a platform for multichannel test and measurement of MIMO systems through extension of MATLAB® algorithms for analysis of channel …
    时长: 24:54
    John Calvin puts the latest oscilloscope technology to work. The DPO70000SX oscilloscopes allows engineers to capture and measure high-frequency signals more accurately than possible with …
    时长: 3m 24s
    Tektronix introduces the industry’s most accurate and repeatable single box solution for characterizing and debugging IEEE802.11ad transmitter PHY for silicon and systems. In this IEEE802.11 …
    时长: 3m 47s
    At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors. Here Tek’s Pavel Zivny showcases a demonstration system with a Tektronix DSA8300 …
    时长: 3m 27s
    At this ECOC 2016 Demo Station, we're looking at generating a 50+ Gigabaud Optical Signal and also how our DPO70000SX oscilloscope enables a stable trigger on a 32 Gigabaud signal.
    时长: 2m 49s
    Learn how new software features of the Tektronix OM4000 series, which enable multiple optical modulation analyzers to be combined, are enabling research into higher fiber optic transmission …
    时长: 3m 2s
    Watch a demonstration of the first working version of TDECQ that can operate on a 64 gigabit per second DR4 signal.
    时长: 1m 49s
    DDR5 memory pushes the limits of high-speed signaling and tackles the bandwidth challenge imposed by the exponential growth of data generation. See the latest characterization and debug techniques …
    时长: 2:46
    Watch to learn how you can simplify several 3GPP 5G New Radio transmitter tests. You’ll see how to verify transmitter characteristics including power, power dynamics, signal quality and RF …
    时长: 8:50
    Learn how to perform multi-domain signal analysis of 5G base station and user equipment systems.  See the benefits of using a mixed domain oscilloscope for analyzing RF amplifier performance.  …
    时长: 6:47
    See 100G/400G Real-Time and Equivalent Time oscilloscope solutions that enable seamless transition across your workflow. From product R&D and debug to design validation and production test – see …
    时长: 3m 38s
    Watch this video to learn about the new features in TekScope version 1.40, including continuous acquisition, license expiration notification, and IMDA-MECH and WBG-DPT in the pro automotive and …
    时长: 7m 19s